These Plastimo flexible water tanks are strong and reliable and a practical low cost solution to fresh water storage on board. They are flexible, lightweight and form fitting and so can be installed in compartments where it would not be possible to fit a rigid tank.
The inner water bladder can be easily removed from the outer covering for routine cleaning and inspection and replacement inner bladders are available, if required.
The tanks include tie-down loops on the corners and all tanks have a 38mm (1 1/2") hose inlet fitting on the upper side of the tank and a 12mm (1/2") hose outlet fitting on the underside. The exception is the triangular bow tank where both fittings are located on the upper side.
When filled with water all tanks are approx 250mm depth.
Double envelope - a water chamber inside a tough nylon outer. Consists of a welded non-porous tasteless NON-BPA PVC water chamber (inner bladder) inside a tough nylon outer. Completely waterproof and highly resistant to tearing and abrasion.
Bulky freight charges apply to these products.
| Part No | Capacity | Shape | Length | Width |
| RWB8200 | 50lt | Square | 700mm | 700mm |
| RWB8201 | 100lt | Rectangle | 1.05m | 700mm |
| RWB8204 | 120lt | Triangle | 1.05m | 1.15m |
| RWB8282 | 150lt | Rectangle | 1.40m | 700mm |
| RWB8203 | 200lt | Rectangle | 1.75m | 700mm |
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
